Best Revo 3.3 Starter box

[JTak77]

I'm looking to find the best starter box for my Revo 3.3. I have looked at the one from RD logics, I'm just not sure if it will work w/ the extended chassis. Any input welcome, Thanx.

[Casketman]

RD racing has the best box and many other people will agree with that.

[JTak77]

could you poss hook me up with a link on that?

[Mr. Tune]

http://rdracing.powweb.com/Zen/index.php...779c398312

That's the one most revo drivers use. Most of the local hobby shops carry it too.

[JTak77]

Many a thanx!alute:

[son1cn]

yeah i got that one, just look around here and ebay for one, i got mine for $60 i think

PS that starter box does work on the 3.3, you just have to get rid of the EZ start to get it to fit. Also need to grind a little bit off the crank to get the backplate on. Or you could buy a new crank

[Ponch]

PS that starter box does work on the 3.3, you just have to get rid of the EZ start to get it to fit. Also need to grind a little bit off the crank to get the backplate on. Or you could buy a new crank

No you don't. You don't have to, you should but you don't have to. It'll work fine on there as is.

[son1cn]

actually ponch, the peg that lines up the flywheel for starting hits the ez start, so it has to be taken off, and to get the backplate to fit, you have to grind off the starter peg in the back of the motor

[Ponch]

Since when? I had a pull start on there and started with a box....Ok then.

So a cheaper/safer alternative is to get a $10 pull start and do no grinding on the motor.

[son1cn]

or spend $30 and get a new main shaft that is made to be non pullstart