Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
REVO Obstacle Course
#26
Grand!?!?!? How do you figure?? P2 rockers, Foreward only conversion, wheels and tires, pipe, steering servo, steering mods, radio (which goes with ANY vehicle for racing), wing mount and wing. That is all that it NEEDS to be very raceable. I don't know where you got a grand.....
Reply
#27
and then after u replace all the stuff that breaks everytime out...


ttt
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
#28
What don't you understand?? In the whole time I owned the truck I broke one shock end racing, and one pushrod. I broke one arm and one rocker when bashing, one pushrod and a motor mount. That was IT.
Reply
#29
ok dan....

ttt
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
#30
Czech-it-Out Graphics Wrote:ok dan....

ttt


I just think it's hard to say something breaks all the time until you own one and drive one.... I am not a Traxxas fan, but it's a pretty damn cool truck.
Reply
#31
its really not, do u forget i see them every weekend? Ive driven them all that bull....

ttt
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
#32
well in the spirit of the discussion i went to amain and put everything dan listed as *minimum* parts needed for racing and it came out to $955.88. you can buy a top notch truggy for that.
Reply
#33
booyah told ya pud...

ttt
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
#34
joey Wrote:well in the spirit of the discussion i went to amain and put everything dan listed as *minimum* parts needed for racing and it came out to $955.88. you can buy a top notch truggy for that.


Build me a RTR top notch truggy for that price?? No way are you getting a kit, full electronics, motor, reciever pack, starter box, chargers, glow starter, and EVERYTHING to make it RTR for that price. Unless you buy used. If that is the case you can get a full on race revo for under $400 RTR used.
Reply
#35
Czech-it-Out Graphics Wrote:booyah told ya pud...

ttt


You said an extra grand on top of that. That isn't what that number tells me. And I wonder what radio and servos he used. All you need is a steering servo and a simple JR radio. You can buy them lightly used for VERY cheap. No need to buy one $200 new....

I am not saying a Revo is the best race vehicle. I am saying that it is a lot stronger than people say, and isn't near the money pit that the T-Maxx was....
Reply
#36
ya but a good used truggy will spank and new revo anyday lol
Reply
#37
They are completely different classes. They can't be compared like that. would I rather have a truggy?? Yes. Does that mean that you don't have a top notch race revo for that price? No.
Reply
#38
Is that neverland ranch
[url][/url]

IN GOD WE TRUST, ALL OTHERS MUST PAY.
Reply
#39
i used a spektrum dx3 and the 75$ ace servo
Reply
#40
I didnt say it was an additional grand dan, dont forget that price is without ANY spares also

ttt
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
#41
All that I had for spares was a bag of extra arms that I bought off someone for $5 or $10 with some rockers. I never, didn't finish a race from having to buy more parts or because I broke out. If you want to say used.... Look at what Tune sold his revo for. You won't beat that for a raceable MT. (Except maybe Rocco's Salvage. )
Reply
#42
i didnt post that you can get a new truggy for that price, just said you could get a top notch truggy didnt say new thats all i said i didnt say either way wether a revo was good or bad just how much it would cost to do what you said to it thats all, get off my nutz please
Reply
#43
LMAO

ttt
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
#44
joey Wrote:i didnt post that you can get a new truggy for that price, just said you could get a top notch truggy didnt say new thats all i said i didnt say either way wether a revo was good or bad just how much it would cost to do what you said to it thats all, get off my nutz please


I'm not on your nutz. Big Grin That last one was directed at Mike..... I really didn't have a problem with anything that you posted. :confused:
Reply
#45
dan he posted the cost that was almost dead on to what i said, Just cuz u ran one doesnt make it gods gift to the RC world...

ttt
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
#46
Czech-it-Out Graphics Wrote:dan he posted the cost that was almost dead on to what i said, Just cuz u ran one doesnt make it gods gift to the RC world...

ttt

No kidding. Rolleyes And just because you threw out a number that was close to his doesn't make you right. You don't need spektrum, you don't need a $75 servo. Hell you don't even need a pipe.
Reply
#47
ok but who is going to go to the track with an RTR truck with stock electronics, not to mention using the stock motor for long. You know that anybody who races will end up buying a new 250$ motor. I didnt throw out a number i know what im talkin about bud. The revo's are money pits, you know im right about that, why not put the money into a better class to race in just my $.02 prolly a nickel too many

ttt
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
#48
You don't need anything more than the stock motor. Anyone on here will tell you that. It can be run with stock electronics.... but most choose to swap them out. That, FOC, and tires are the main costs. Thay aren't money pits. People choose to upgrade them, but they don't need to be. But that just goes with monster trucks, everyone upgrades them. You didn't own a revo so you don't know the kind of cash they take.... I do.
Reply
#49
this thread WAS about an RC obsticle course.
Mugen MBX5T
RBS5
RB2045
Futaba 3PM
Hitec 5955, 5965
Reply
#50
we found a new obstacle lol


ttt
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  E-Revo Brushless Edition? Summit? J-Dub 2 3,551 10-26-2008, 08:23 AM
Last Post: Fastlane GraphiX
  Batteries for stock e revo ricketki 4 6,193 08-05-2008, 06:40 PM
Last Post: BJoe
  Tower hobbies is giving away Platnium REVO's! Whoo Hoo! team3six 20 6,807 04-03-2008, 06:20 PM
Last Post: Toughtrax
  Revo, a race truggy? snoracer 61 14,430 02-13-2008, 05:27 PM
Last Post: J-Dub
  Traxxas Revo.... J-Dub 42 8,647 11-10-2007, 08:41 PM
Last Post: Michowski
  Quick Revo Diff question stratcat 12 3,593 08-10-2007, 04:55 PM
Last Post: DAVEC-NITRO-RS4
  Revo? Whitey04 33 7,255 05-27-2007, 09:00 PM
Last Post: J-Dub
  vantage one-way axle for 3.3 revo Meatwad 5 2,429 05-21-2007, 09:25 PM
Last Post: hansarvin
  Revo 3.3 Setup SEEKandDESTROY2 10 2,975 03-16-2007, 07:56 AM
Last Post: chickenfarmer3
  Project Darth Revo has begun... Mr. Tune 237 39,886 01-28-2007, 11:05 PM
Last Post: snakebite46

Forum Jump:


Users browsing this thread: 2 Guest(s)