Wanted: REVOS or Truggys

[HondaMotocross]

Hello everyone, i am looking to buy a revo or two. I have a racer revo that i completely built from the ground up, and i enjoyed building it. Since its the middle of winter and its too cold to be in my garage working on my other projects, i figured id get another R/C to tinker with in the basement.

I am looking for a revo in good shape, it can be stock, or modified, or even a roller. ANY REVO!!!!

I also will consider 2 truggys: MBX5T, OFNA Jammin' Again, Good shape, modified, in parts, roller, it doesnt matter

I live in NW Indiana, about 40 mins east of LHR, and will meet at the track or wherever is convenient with you and pay Cash so shipping will not be an issue!!!

Post or PM me with what you have, and a ballpark price, and we will go from there.


Thanks for looking,
Jon

[mfanke19]

Would like to get a portion of my money back on this truggy that has NEVER BEEN RUN! The engine and exhaust are used, but everything else is new.

*Hot Bodies Lightning Stadium PRO Truggy ( minus stock engine, exhaust, electronics )
*OS VG 30 engine ( used, with 2 gallons thru it )
*Jammin JP1 pipe ( used, with slight dent )
*Diffs filled with 7,10,5 ( front, center, rear )
*Shocks filled with 50,40 ( front, rear )
*New Jammin X1 CRT fuel tank ( comes with stock tank also )
*four(4) new Proline Bowtie MTR tires with molded foams
*four(4) new Proline 17mm wheels ( white )
*one(1) new Proline Hi Downforce Wing ( white )
*one(1) new Proline Crowd Pleazer 2.0 for Kyosho ST-R ( trimmed, unpainted )
*CVD's all the way around
*17mm hub conversion
*Kyosho 3.5mm Shock Shafts
*Racers Edge 3.5mm Aluminum Shock Ends
*used set of Panther Clays mounted on 17mm wheels
*custom machined aluminum servo tray standoffs ( sturdier for less flex )
*custom machined white delrin body mounts
*bearings mounted in steering bellcranks
*Dozens of brand new Hot Bodies parts new in package

[mfanke19]

Here is a shot with the trimmed Crowd Pleazer 2.0 for ST-R body...


This shot shows the used OS VG30 engine, along with the custom chassis stiffening motor mounts, and the Jammin fuel tank...


Here you can see the doubled-up ackerman plates. And there are bearings in those bellcranks...


You can see from this pic that the engine is NOT abused...


Tons of spare parts, new in package...


Panther Clays in good shape...


Panther Clays in good shape...

[mfanke19]

Stock LSP shock shaft with 3.0mm threads on the right, and the upgraded Kyosho shock shaft with 3.5mm threads...


Here's a shot of the Racers Edge aluminum shock ends installed...


Not a scratch on her yet...


Custom Delrin Body Mounts...


Showing the stainless hardware and vibration isolating o-rings on the fuel tank...


Assembled shot showing the custom delrin tank risers...


Brand new never run Pro-Line Bow-Tie MTRs, with molded foams, mounted on Pro-Line White Velocity 0 Offset Truggy Wheels p/n PRO269004...

[mfanke19]

Looking to get $475 for everything shown, or would be willing to sell the truggy alone ( no engine, exhaust or electronics but with all extras listed ) for $325 obo

[Ponch]

My bud on here is selling an EXCELLENT, race ready revo with +$1000 in hopups/extras. Has an EB modded 18tz with around a gallon on it. He'd go meet up at lhr on almost any given weekend, and is looking for around $425, no radio (mabye no servos, don't remember) I'll find the link. Definately a great buy. his username on here is destroy_my_revo_15

[Ponch]

http://www.chitownrc.com/showthread.php?t=6027

There's the thread.

[Ponch]

ok so i finnally decided to sell my revo...

Heres whats all included:
rpm a-arms front
traxxas set backs in the rear
rpm axle carriers (blue)
23mm adapters/wrench
p-2 rockers
traxxas ext chassis
pmb 23mm setup station
front shocks have orange springs
rear shocks have gold springs and TiN shock shafts
center diff/ rear brakes/ trans housing
red pushrods (rear)
mugen wing stay/ mugen wing
basher crowd pleazer 2.0 body
rd racing starter box w/ gell cell
traxxas hd steering spring
shock socks
mip alu turnbuckles
O.S. 18tz EB MOD little more than a gallon thru
ths racing exhaust
Proline Bowtie MTR on 23mm half offset i believe
panther pythons on 23mm 1/2 offset
bowties on hurricanes (street use tires)
std offset mt rims 23mm
traxxas hurricanes
1 pair PL road rages on 14mm dishes
SPARES

TRAXXAS 3.3 needs con rod and prolly a good idea for different bearings
stock pipe w/ os header
stock pipe #2
ms airfilter w/2nd stage
stock pushrods
stock turnbuckles
stock axle carriers
stock pivot balls
spare set of p-2 rockers
stock p-1 and LT rockers
stock white, green, silver, and blue springs
10k diff oil
60wt shock oil
70wt shock oil
2 traxxas 2.5®/3.3 pull starts and one ways
5 stock rocker posts
few center driveshafts
std and close ratio trans gears
ring and pinion
2 38t spur gears
15t clutch bell
mip clutch
1 diff housing
motor mount parts (not complete)
2 roll hoops
trans skid
stock tranny housing
one complete set of stock arms minus the front left
one complete set of setback arms
2 complete rear bulkheads
1 complete front bulkhead
ALL original boxes and manuals
there is probably more than this...
i would sell with a Spektrum dx3 and jr 650z and 270z servos for the right price....im open to offers right now for a price...show me what ya got pretty much anyone would vouch that i take very good care of my stuff

[Ponch]

Just added it up, right around $1450 in hopups and spares.

[hansarvin]

I'm selling a Jammin X1 CRT RTR roller for $250 you can call me at 1-(309)-923-7630

[Traxxas_Junkee]

Post whore much?

[Ponch]

Spam bitch much?

[FreeRideFrosty]

mfanke- Like I said, if you do end up parting it out, I would like first crack at those bow-ties on zero offset wheels. Thanks.

[HondaMotocross]

Wow alot of good stuff for sale.......ive already picked up a few revos from here.....i am mainly interested in truggys now, Jammins or Mugens.....ill keep all you guys in mind.


Thanks,
Jon

[hansarvin]

I'm sorry guys I've been getting off on the wrong foot in this forum I feel bad and dumb like a post whore and deserved those names the mods can delete all of my useless posts sorry if I've been post whoring

[Traxxas_Junkee]

Haha, dude. I wasn't talking to you. I was talking to Ponch up there who posted 4 in a row.

[AddictedtoNITRO]

lol missundertood ya

[Traxxas_Junkee]

Yeah. He's just got to get used to the forums is all. We all screw around with eachother, rarely does anyone mean any harm.

[AddictedtoNITRO]

yea he might call the cops on rocco and mikey lol
ok back on topic sorry

[Ponch]

hansarvin, me and traxxas junkee were messing with each other, not calling you stuff like that, lol, you didn't do anything! Don't worry!

[hansarvin]

Doh I'm new to this Forum now seriously back the topic buy mine!!!

[hansarvin]

o and almost forgot pics

[hansarvin]

also its got about 10 tanks on it and in those 10 tanks I blew the Force .28 lol

[slaytanic]

I've got a CRT w/ 2 sets of practice tires, 2 wings, body, and z-brace. 250 as a roller and 400 with Picco P3 .28 w/ nova race head. About a gallon on it a reallly screams. Can send pics if interested. Only reason I'm selling is I just built a matrix tr arena and want to get the matrix buggy for the pair. LMK