The Official Mugen Thread

[Ponch]

What's the dimensions for the screws for the diff housings from the bottom? 3.5x10 or?

[chickenfarmer3]

4x10
hey ponch my whole setup is in thread 310 on the grid.

[allan42r]

you mean the four flat head 3x8 screws that hold your diff together?
replace these with 3x10 screws. the holes go to 15 so some guys
are using 3x12. ira,cory john and i are all using the 3x10 screws with
a little permatex ultra blue gasket silicone part # 77b. do yourself a
favor and go to ace hardware and pickup the screws,silicone,and some
naptha over by the paint thinner and other tins of chems. when you go
to clean your diffs put all of the gears and even the plastic diff cup
with a little naptha in a jar,let set for 5 minutes and your gears will
come out clean

[allan42r]

and if your asking about the four flat screws that hold the diff to the
chassy they are 4x15. close chad but no gold star

[allan42r]

the car comes with a set up sheet with the directions. or you can go
to Mugen Seiki Racing Ltd -HOME-.

we are running the stock set up except for the swaybars; 2.8
rear and a 2.3 on the front.this will let the car roll a little more and
give you more traction. the rear shocks are 350 oil and 400 in the front
do not listen to the guys at the shop 350 oil does not = 35 wt.

[chickenfarmer3]

guess i better change my sway bars then.....:O

[chickenfarmer3]

ok, for those of you that have been waiting.....




ran them at LH indoor the other night and they were unbeleivable!
making a set of bowties right now.

[chickenfarmer3]

:leghumptay tuned next week for more moooolicious updates.....:leghump:

[Ponch]

and if your asking about the four flat screws that hold the diff to the
chassy they are 4x15. close chad but no gold star

Those. Thanks. Making up an order from Tony's Screws and just wanted to pick up what I needed.

[chickenfarmer3]

dont forget some 3x12 for the diffs, atleast 12 of them.

[Ponch]

Why 12 of them? They're in my cart anyway.

[chickenfarmer3]

4 for each diff....duh....lol

[Ponch]

Wooooww....Can't believe I didn't catch that. Haha. I was thinking f/r diff...duh

[Ponch]

Qty Item # Description Price Total
Each Price
--------------------------------------------------------
1 TS-CH3M12-20 3mm x 12mm Cap Heads 1.55 1.55

1 TS-FH3M8-20 3mm x 8mm Flat Heads 1.80 1.80

1 TS-FH3M10-20 3mm x 10mm Flat Heads 1.80 1.80

1 TS-FH3M12-20 3mm x 12mm Flat Heads 2.30 2.30

1 TS-FH3M16-20 3mm x 16mm Flat Heads 2.55 2.55

1 TS-FH3M30-10 3mm x 30mm Flat Heads 2.25 2.25

1 TS-FH4M15-20 4mm x 15mm Flat Heads 2.50 2.50

1 TS-ZPN3M-20 3mm Nylon locknut 1.25 1.25
--------------------------------------------------------
Subtotal 16.00
Tax 0.00
Shipping (Standard Shipping) & Handling 4.90




What I got...Just got to get some of those blingin blue washers that go under the flat head screws.

[chickenfarmer3]

nice dude.

[rocco79]

Chad take pics as you make them...
A nice tutorial would be cool

[Stahoo]

Chad take pics as you make them...
A nice tutorial would be cool

+1

I'd like to see as well.

[Casketman]

I told him that already.. He said hell no.. He is going to keep it to himself that bastage

[J-Dub]

punch him in the groin area. lol

[rocco79]

Yeah chad....

Cuz THATS your ace in the hole...... ( Super mega eye roll)

[allan42r]

id sure like to see a mugen sticker on that nice truck alute:
and damn these tires better make a diff they take a long time
to cut and glue

[chickenfarmer3]

yes they do take forever....and alot of glue....I guess for you guys i will take some pics, guess i gotta go buy some more and glue up...

If they aint payin....i aint putting the stickers on....

[pwnzor]

Chad, It may entice them to sponsor you if you represent for them @ races

[allan42r]

oh ok you mean some old guy that's with mugen not been helping you?:confused:

[chickenfarmer3]

that old guy helps all the time.