08-09-2006, 04:33 PM
hells no im still trying to find someone to make them
|
Decals / Customer Service
|
08-09-2006, 04:41 PM
I got mine from PAnther, they are awesome. I got 4 wing decals, a set of wheel stickers, and a bunch of name stickers plus the 2 starter box wraps. They are all super nice quality. I am int he process of rebuilding my crt, once doen I will snap some photos of it all. They look awesome....
A friend will help you move, but a REAL friend will help you move a body.
08-09-2006, 04:46 PM
i saw the pics you posted and the guy did the graphic for a few guys latemodels that i know, like i said things started out good but its been a while now and im just trying to figure out where everything stands, i know hes probably busy but i will wait a while, plus you sent him an email for me.
08-15-2006, 12:20 PM
Czech-it-Out Graphics Wrote:G did u even get ur decals yet? Nope - Nothing! Every time I call I get voicemail, and the voicemail box is full, so I can't even leave a message. I don't get replies to emails either. Now when i last spoke with him, he said they had been printed up. So that must have been a lie, or they are sitting on a desk waiting to be mailed. But I doubt that, because I have not been billed for anything. And I noticed that he is a sponser for the upcoming race at Leisure Hours. So he must answer certain phone calls! This is MaxSpeedDesigns I am talking about for anyone who wants to know. Guess I need to check out some of these other places again. I never thought this would be so difficult!
E-REVO [COLOR="Gray"]Brushless[/COLOR]
Orange / Gold + 50 wt. Aluminum Pushrods [COLOR="Black"]/ Turnbuckles[/COLOR] [COLOR="DimGray"]Liquid FX[/COLOR] Airbrushed Body http://www.liquidfxairbrushing.com 
08-15-2006, 12:51 PM
maxspeed is supposed to be the sponsors of RCPS. Dont worry i cant get ahold of teh guy either
  mash:
Here is a link to my website-
http://www.czech-it-out-graphics.com 1/29/07 never forget....TTT alute:Bringing old know-it-all blow hards back to reallity at a forum near you "Always Imitated, Never Duplicated"
08-15-2006, 12:55 PM
I gave the guy at Panther a call to see what type of Illustrator file to send him. He did answer his phone...so the email has been sent to him. Sounds like others have had a good experience with him. So as usual, I will keep everyone up to date!
So is MaxSpeed just that busy? Is that strictly a side business he runs, and his main business is something else? I guess I don't understand how they run the business when the voicemail box is full, no one answers phones, and emails are not responded to. I mean do they just have a room with expensive printers sitting there, that are never used while they do something else for a living? Does anyone know?
E-REVO [COLOR="Gray"]Brushless[/COLOR]
Orange / Gold + 50 wt. Aluminum Pushrods [COLOR="Black"]/ Turnbuckles[/COLOR] [COLOR="DimGray"]Liquid FX[/COLOR] Airbrushed Body http://www.liquidfxairbrushing.com
08-15-2006, 01:12 PM
i wish i did. I think he is just that busy. I know when Cramer worked there he always aasnsered the phone but he never got jack chit done so I really dont know what the story is anymore.....suffice to say i need soem decals!
Here is a link to my website-
http://www.czech-it-out-graphics.com 1/29/07 never forget....TTT alute:Bringing old know-it-all blow hards back to reallity at a forum near you "Always Imitated, Never Duplicated" 
08-16-2006, 08:50 PM
Ayight, you guys are scaring me....LOL... I talked to Kevin at MaxSpeed about a week and a half ago, he said he should be able to get my stuff done by the end of this week...I haven't heard anything since, and my CC hasn't been billed yet either. Kevin was talking about working on moving the shop to the Rockford area sometime soon due to expanding the business in other directions as well as RC. Just hope the stickers get done soon....another 4 or 5 bodies, and I'm out of reverse printed logos......
=== Five-O Designs ---> Custom-painted RC bodies ===
TTR S3 - KHz hop-ups, flat chassis. Hot Bodies LSP - Tricked out with plenty o' bling from the King
08-16-2006, 09:30 PM
RytM1 Wrote:Ayight, you guys are scaring me....LOL... I talked to Kevin at MaxSpeed about a week and a half ago, he said he should be able to get my stuff done by the end of this week...I haven't heard anything since, and my CC hasn't been billed yet either. Kevin was talking about working on moving the shop to the Rockford area sometime soon due to expanding the business in other directions as well as RC. Just hope the stickers get done soon....another 4 or 5 bodies, and I'm out of reverse printed logos...... I still have no luck getting in touch with anyone! I have not been billed, and nothing has come in the mail. I think we are screwed! Hopefully Panther will come through for me, and I can refer him to others. No response yet, but it has only been a day...so I will give it more than that!
E-REVO [COLOR="Gray"]Brushless[/COLOR]
Orange / Gold + 50 wt. Aluminum Pushrods [COLOR="Black"]/ Turnbuckles[/COLOR] [COLOR="DimGray"]Liquid FX[/COLOR] Airbrushed Body http://www.liquidfxairbrushing.com 
08-16-2006, 09:44 PM
At least people aren't billing and then not shipping ever...
Tekno EB48.4 HobbyWing XR8 Sanwa M12
08-16-2006, 09:53 PM
I've got an idea...............how about a single color paint job with badly cut window lines. I can even use a sharpie to put on some 'decals'. I have plenty of free time.
any takers?? j/k salute:
Losi 8B - O.S. - Futaba - ACE
08-16-2006, 09:59 PM
Guys Seann has been extremely busy, he will get back to you, remember these guys do this as spare work, not a full time job. Seann does liek 6 full race cars a week and he is a one man show. So he does this in his free time.
Jack and Joey you have PM's. Rodzo, Seann has gotten your email.
A friend will help you move, but a REAL friend will help you move a body.
08-16-2006, 10:05 PM
[QUOTE=Rodzo, Seann has gotten your email.[/QUOTE]
Yeah, I figured he had. He told me on the phone that he will get to it as soon as possible. And if that is within 1 month, then it is still faster then MaxSpeed! I've waited this long, so what the hell is another month? I just think with how busy these guys are, I will order a larger quantity!
E-REVO [COLOR="Gray"]Brushless[/COLOR]
Orange / Gold + 50 wt. Aluminum Pushrods [COLOR="Black"]/ Turnbuckles[/COLOR] [COLOR="DimGray"]Liquid FX[/COLOR] Airbrushed Body http://www.liquidfxairbrushing.com
08-21-2006, 10:55 AM
Well, I think it's official...
Max Speed is no longer! At least their web site has been disabled! I have not checked the phone number, but I am assuming I will never get my decals... So don't bother with MaxSpeedDesigns! If they are not out of business, they suck! They don't reutrn phone calls, emails, or deliveries! They lie about when things are done, and don't deserve your business!
E-REVO [COLOR="Gray"]Brushless[/COLOR]
Orange / Gold + 50 wt. Aluminum Pushrods [COLOR="Black"]/ Turnbuckles[/COLOR] [COLOR="DimGray"]Liquid FX[/COLOR] Airbrushed Body http://www.liquidfxairbrushing.com
08-21-2006, 11:02 AM
u got their number man Im callin one more time before i take all the decals of my stuff
Here is a link to my website-
http://www.czech-it-out-graphics.com 1/29/07 never forget....TTT alute:Bringing old know-it-all blow hards back to reallity at a forum near you "Always Imitated, Never Duplicated"
08-21-2006, 11:21 AM
Czech-it-Out Graphics Wrote:u got their number man Im callin one more time before i take all the decals of my stuff Let me know if you get in touch, and I will edit my previous post! I never stored their number anyplace, I just went to the website to get it...now that's gone. I tried a yellowpages.com search, but didn't come up with it, and just didn't feel like doing a bunch of work to find it. Oh well...Panther can to the Black on Clear, but not the White on Clear...needs a different printer for that. So I emailed him back to see about a Yellow on clear, to see what that costs... Panther DID get back to me!!! So that's a Plus! He just has a CMYK printer though...so if you need anything white on clear, he can't do it. But he should be able to do everything under the sun on White vinyl!
E-REVO [COLOR="Gray"]Brushless[/COLOR]
Orange / Gold + 50 wt. Aluminum Pushrods [COLOR="Black"]/ Turnbuckles[/COLOR] [COLOR="DimGray"]Liquid FX[/COLOR] Airbrushed Body http://www.liquidfxairbrushing.com
08-21-2006, 11:37 AM
The number is 815-923-2210, but that is conveniently disconnected too. Anyone know Kevin's last name?...I'll find him......
=== Five-O Designs ---> Custom-painted RC bodies ===
TTR S3 - KHz hop-ups, flat chassis. Hot Bodies LSP - Tricked out with plenty o' bling from the King
08-21-2006, 11:38 AM
lol detective jack hahaha
Here is a link to my website-
http://www.czech-it-out-graphics.com 1/29/07 never forget....TTT alute:Bringing old know-it-all blow hards back to reallity at a forum near you "Always Imitated, Never Duplicated" 
08-21-2006, 12:12 PM
Someone should contact the guys who run rcpro. maxspeed should probably be taken off their site as the main sticker maker for rcpro numbers.
08-21-2006, 12:19 PM
Absolutely !!!
=== Five-O Designs ---> Custom-painted RC bodies ===
TTR S3 - KHz hop-ups, flat chassis. Hot Bodies LSP - Tricked out with plenty o' bling from the King
08-24-2006, 09:48 AM
I wanna give props out to Panther Designs (Sean)!
Extremely nice on the phone, very knowledgable, and willing to share info about the business! I'm actually going to re-design my decals, because what I wanted done, really can't be done! But he gave me all the info I need! AND SWEET ASS PRICES IF YOU ASK ME!!!!!!!!!!!!!!! I think he, or someone has mentioned it before, if you are serious about getting something, give him a call first, and he will know to be looking for your email. So Czech and Five-O - I think this guy will be an improvement over MaxxSpeed. I don't know if he can do the reverse decal that can be put on the inside howevre, but it's worth the call! 740-374-4237
E-REVO [COLOR="Gray"]Brushless[/COLOR]
Orange / Gold + 50 wt. Aluminum Pushrods [COLOR="Black"]/ Turnbuckles[/COLOR] [COLOR="DimGray"]Liquid FX[/COLOR] Airbrushed Body http://www.liquidfxairbrushing.com
08-24-2006, 11:25 AM
Yeah, I may have to reach out to him. I sent an email to Carlton at ProSeries about ONE of his sponsors. I haven't heard anything back yet.
=== Five-O Designs ---> Custom-painted RC bodies ===
TTR S3 - KHz hop-ups, flat chassis. Hot Bodies LSP - Tricked out with plenty o' bling from the King 
08-26-2006, 01:26 PM
Hi guys!
Sorry, I'm a little late to the party on this one... been swamped! I just wanted to chim in with some experiences.... I used to use Max Speed a long time ago. They were decent, but by far the cheapest! So I usually ended up going with them. Then things started going down here.. no returned calls, no emails... then I heard that the original guy sold the company... I think I tried once or twice to get a quote.. never got it.. moved on... I'm not sure how many stickers your looking for, but if you are looking for BIG numbers, I now use the same people Team Associated uses! The only problem is, the minimum order is hundreds. The place is called The Tape Factory.. http://www.tapefactory.net I think it's down at the moment.. but if you are looking for big numbers.. and good quality.. these guys are the pro's. I have also had problems now trying to have a vinyl banner made! I have contacted 4 places, none of them get back to me. The one that did.. were total d*cks about it, and wanted about 2x more then I think it should cost... Oh well. Brian
http://www.BigSquidRC.com
For Bashers, By Bashers!
08-26-2006, 04:10 PM
Brain, depending on what you are looking for in the way of a banner, Xtreme Graphics in Villa PArk does them too. Ask for Steve.
http://www.x-tremegraphics.com
=== Five-O Designs ---> Custom-painted RC bodies ===
TTR S3 - KHz hop-ups, flat chassis. Hot Bodies LSP - Tricked out with plenty o' bling from the King
08-26-2006, 06:41 PM
Thanks!
I'll give them a call next week. Brian
http://www.BigSquidRC.com
For Bashers, By Bashers! |
|
« Next Oldest | Next Newest »
|
| Possibly Related Threads… | |||||
| Thread | Author | Replies | Views | Last Post | |
| decals anyone??? | chickenfarmer3 | 9 | 2,482 |
05-23-2007, 10:31 PM Last Post: chickenfarmer3 |
|
| Who does number decals? | Rob Kass | 16 | 3,382 |
04-19-2006, 07:24 PM Last Post: Tex |
|
| Proline RC Customer Service problems. | Traxxas_Junkee | 4 | 1,520 |
01-10-2006, 07:53 AM Last Post: Traxxas_Junkee |
|
| LRP/Associated Customer Service | bandit | 13 | 2,860 |
10-07-2005, 08:14 PM Last Post: Tex |
|
Users browsing this thread: 3 Guest(s)