Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
General truggy/arena talk
#26
proline adapters are junk IMO. Ive had them and they just put way to much stress on the driveshafts. Ive seen and heard of tons of people who had problems snapping them. Better off getting the dace adapters
[Image: mich1iy1.jpg]
Reply
#27
i havent had much experience with that kinda thing but im sure something along those lines would be better than the 17mm hubs
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
#28
the nubz by HPI are good tires, Six raced with them at a campmaxx this past season in STL. they seemed to hook well. The dirt is comparative to the dirt dawgs tracks. Kev, I think those would be a good choice
Mugen MBX5T
RBS5
RB2045
Futaba 3PM
Hitec 5955, 5965
Reply
#29
Most people are dumping LSP's for CRT's because its the new kid on the block. Same thing happened when the TTR S3 and XB8 came out. LSP's dont break as easy as some people think.
Reply
#30
Snake and bigjs are right.... Im not a very good racer so i know my lsp has seen its share of wrecks and in nearly a year of racing ive broken ONE (1) Plastic turnbuckle.... Not to mention George has totally field tested the trucks crashability thoughly AND put the drive drivetrain though a serious test with that V-8 he bolted in!!!!
Dont mess wit my sig Line tune!
--Then follow the rules! haha!-- -Tune
Reply
#31
LSP's are tough, period. It's been proven!

that must have been a fluke with kit's LSP, squirrel :confused:
Mugen MBX5T
RBS5
RB2045
Futaba 3PM
Hitec 5955, 5965
Reply
#32
LSP ???

Losi???
Life is like Beavers, One Damn thing after another- Unknown
If your not breakin parts your not going fast enough-Biodragen


NTC3 RTR assoc .15
NTC3 OS .18

Losi 8T, JR8611a ST servo, Futaba 9350 Th\Brk Servo, RB-C6BB Motor and Novarossi 528XR.
Reply
#33
Hot Bodies Lightning Stadium Pro
Dont mess wit my sig Line tune!
--Then follow the rules! haha!-- -Tune
Reply
#34
Losi LST lol
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
#35
Tex Wrote:LSP's are tough, period. It's been proven!

that must have been a fluke with kit's LSP, squirrel :confused:


that wasn't a fluke!!!! 9.5's are stronger than a lsp!!! for those that don't know my buggy stalled at the end of the straight away and before i could get it i was rear ended by a lsp. destroyed the front right hinge pin/arm on it and the buggy walked away without a scratch!! he was pissed that he broke and i didn't!
IT'S ALL ABOUT THE PAIN; THE INK AND THE JEWELRY ARE JUST SOUVENIERS
Reply
#36
9.5's are tanks.... But what excatley broke on the lsp ??? The alum. arm??? or the hinge pin brace??? if it was the brace they are a weak stock piece. I have a king headz one it wont break.

Besides if your cookin down a straight and hit a stationary object , like a buggy in the rear where the bulk head ties everything together ofcourse the truck thats moving is gonna break
Dont mess wit my sig Line tune!
--Then follow the rules! haha!-- -Tune
Reply
#37
i think it was a kings head brace!!! i think he's got a lot of khz parts on it. i don't remember exactly i'll p.m. him and see what it was that broke!
IT'S ALL ABOUT THE PAIN; THE INK AND THE JEWELRY ARE JUST SOUVENIERS
Reply
#38
Well if it WAS a king headz brace it was a fluke... And a seriously hard impact. Where were you racing at?
Dont mess wit my sig Line tune!
--Then follow the rules! haha!-- -Tune
Reply
#39
the showmerc track in st. louis. all you heared was me yell watch out and then a very loud crash! i wish it was on video!
IT'S ALL ABOUT THE PAIN; THE INK AND THE JEWELRY ARE JUST SOUVENIERS
Reply
#40
it's a good idea that whenever your stuck on a strait (or see anyone stuck for that matter) to yell out (WATCH THE STRAIT) as loud as you can. Just a tool you can use for future reference. Smile
Mugen MBX5T
RBS5
RB2045
Futaba 3PM
Hitec 5955, 5965
Reply
#41
i did but it was to late!! plus ralphie was already drunk! i died at the end as he was half way through the straight!

btw rocco it bent the hinge pin, shock shaft, and took out the brace but it was all stock.
IT'S ALL ABOUT THE PAIN; THE INK AND THE JEWELRY ARE JUST SOUVENIERS
Reply
#42
[Image: I3010410.jpg] [Image: I3010409.jpg] [Image: I3010412.jpg]
Reply
#43
nice pics but why so much fuel line?
IT'S ALL ABOUT THE PAIN; THE INK AND THE JEWELRY ARE JUST SOUVENIERS
Reply
#44
The stock Hinge pin Brace on the LSP sucks royal!!! I Forgot that i broke that too(Sorry so 2 parts have broke in a year) The 1st time i drove my lsp at leisure hour. Thats a pretty hefty arm pullin on a chitty brace
Dont mess wit my sig Line tune!
--Then follow the rules! haha!-- -Tune
Reply
#45
Rocco, that's the same brace that Lance-a-little broke on his LSP in a crash that didn't look too bad to me. Maybe Kingheadz will be making a better one but this is one of the reasons why I don't much care for the LSP. It's too heavy and breaks too easily. Not as bad as a Revo, but not as tough as the Jammin' appears to be from all reports.
Reply
#46
What do you expect from an RTR???? There are parts that arent going to be up to snuff for racing... It goes for every single RTR on the market.

The brace isnt good enough for the ridgeness of the alum. arms. A 20 buck king headz part fixes it for good
Dont mess wit my sig Line tune!
--Then follow the rules! haha!-- -Tune
Reply
#47
I dunno, maybe someone could help me with the fuel line routeing???
Reply
#48
satoch Wrote:It's too heavy and breaks too easily. Not as bad as a Revo, but not as tough as the Jammin' appears to be from all reports.

what's the comparison in weight? how much does the lsp weigh and how much does the jammin' weigh?
Kanai K3
Kanai K2
LSP-R project
Reply
#49
From what ive red the lsp weighs in at the 10lb mark... I looked to see what a jammin weighed but its not on the site
Dont mess wit my sig Line tune!
--Then follow the rules! haha!-- -Tune
Reply
#50
people at the UE board were weighing ready to go jammin's at 9 1/2lbs give or take some change.
Mugen MBX5T
RBS5
RB2045
Futaba 3PM
Hitec 5955, 5965
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Jammin CRT.5 Minni Truggy? Agd123 5 3,001 08-06-2008, 09:05 AM
Last Post: Tex
  Revo, a race truggy? snoracer 61 14,463 02-13-2008, 05:27 PM
Last Post: J-Dub
  Indoor Tires. Truggy, Boas And Holeshots? or just Boa J-Dub 9 3,044 01-15-2008, 01:02 PM
Last Post: J-Dub
  $300 rtr truggy for the beginners. DAVEC-NITRO-RS4 5 2,455 10-21-2007, 09:45 PM
Last Post: rocco79
  Possible AE truggy? Evil3 94 14,441 08-14-2007, 11:31 PM
Last Post: J-Dub
  Which tires for Truggy outdoor? motoxer4life 23 5,802 08-06-2007, 03:29 PM
Last Post: motoxer4life
  What truggy as a basher? motoxer4life 198 34,608 07-19-2007, 08:21 AM
Last Post: motoxer4life
  Cen Matrix TR Arena?? Revoguy22 6 1,824 06-13-2007, 03:09 PM
Last Post: Casketman
  The 8 Truggy's R Out, SLOW REVO 125 20,046 03-14-2007, 06:33 PM
Last Post: FreeRideFrosty
  decent entry level truggy AddictedtoNITRO 55 9,842 02-25-2007, 04:45 PM
Last Post: AddictedtoNITRO

Forum Jump:


Users browsing this thread: 1 Guest(s)