11-19-2005, 05:19 PM
proline adapters are junk IMO. Ive had them and they just put way to much stress on the driveshafts. Ive seen and heard of tons of people who had problems snapping them. Better off getting the dace adapters
General truggy/arena talk
|
11-19-2005, 05:19 PM
proline adapters are junk IMO. Ive had them and they just put way to much stress on the driveshafts. Ive seen and heard of tons of people who had problems snapping them. Better off getting the dace adapters
11-19-2005, 06:17 PM
i havent had much experience with that kinda thing but im sure something along those lines would be better than the 17mm hubs
Here is a link to my website-
http://www.czech-it-out-graphics.com 1/29/07 never forget....TTT alute: Bringing old know-it-all blow hards back to reallity at a forum near you "Always Imitated, Never Duplicated"
11-19-2005, 06:21 PM
the nubz by HPI are good tires, Six raced with them at a campmaxx this past season in STL. they seemed to hook well. The dirt is comparative to the dirt dawgs tracks. Kev, I think those would be a good choice
Mugen MBX5T
RBS5 RB2045 Futaba 3PM Hitec 5955, 5965
11-20-2005, 03:23 AM
Most people are dumping LSP's for CRT's because its the new kid on the block. Same thing happened when the TTR S3 and XB8 came out. LSP's dont break as easy as some people think.
11-20-2005, 07:51 AM
Snake and bigjs are right.... Im not a very good racer so i know my lsp has seen its share of wrecks and in nearly a year of racing ive broken ONE (1) Plastic turnbuckle.... Not to mention George has totally field tested the trucks crashability thoughly AND put the drive drivetrain though a serious test with that V-8 he bolted in!!!!
Dont mess wit my sig Line tune!
--Then follow the rules! haha!-- -Tune
11-20-2005, 12:23 PM
LSP's are tough, period. It's been proven!
that must have been a fluke with kit's LSP, squirrel :confused:
Mugen MBX5T
RBS5 RB2045 Futaba 3PM Hitec 5955, 5965
11-20-2005, 03:46 PM
LSP ???
Losi???
Life is like Beavers, One Damn thing after another- Unknown
If your not breakin parts your not going fast enough-Biodragen NTC3 RTR assoc .15 NTC3 OS .18 Losi 8T, JR8611a ST servo, Futaba 9350 Th\Brk Servo, RB-C6BB Motor and Novarossi 528XR.
11-20-2005, 03:51 PM
Hot Bodies Lightning Stadium Pro
Dont mess wit my sig Line tune!
--Then follow the rules! haha!-- -Tune
11-20-2005, 03:56 PM
Losi LST lol
Here is a link to my website-
http://www.czech-it-out-graphics.com 1/29/07 never forget....TTT alute: Bringing old know-it-all blow hards back to reallity at a forum near you "Always Imitated, Never Duplicated"
11-20-2005, 04:03 PM
Tex Wrote:LSP's are tough, period. It's been proven! that wasn't a fluke!!!! 9.5's are stronger than a lsp!!! for those that don't know my buggy stalled at the end of the straight away and before i could get it i was rear ended by a lsp. destroyed the front right hinge pin/arm on it and the buggy walked away without a scratch!! he was pissed that he broke and i didn't!
IT'S ALL ABOUT THE PAIN; THE INK AND THE JEWELRY ARE JUST SOUVENIERS
11-20-2005, 04:17 PM
9.5's are tanks.... But what excatley broke on the lsp ??? The alum. arm??? or the hinge pin brace??? if it was the brace they are a weak stock piece. I have a king headz one it wont break.
Besides if your cookin down a straight and hit a stationary object , like a buggy in the rear where the bulk head ties everything together ofcourse the truck thats moving is gonna break
Dont mess wit my sig Line tune!
--Then follow the rules! haha!-- -Tune
11-20-2005, 04:20 PM
i think it was a kings head brace!!! i think he's got a lot of khz parts on it. i don't remember exactly i'll p.m. him and see what it was that broke!
IT'S ALL ABOUT THE PAIN; THE INK AND THE JEWELRY ARE JUST SOUVENIERS
11-20-2005, 04:22 PM
Well if it WAS a king headz brace it was a fluke... And a seriously hard impact. Where were you racing at?
Dont mess wit my sig Line tune!
--Then follow the rules! haha!-- -Tune
11-20-2005, 04:25 PM
the showmerc track in st. louis. all you heared was me yell watch out and then a very loud crash! i wish it was on video!
IT'S ALL ABOUT THE PAIN; THE INK AND THE JEWELRY ARE JUST SOUVENIERS
11-20-2005, 05:30 PM
it's a good idea that whenever your stuck on a strait (or see anyone stuck for that matter) to yell out (WATCH THE STRAIT) as loud as you can. Just a tool you can use for future reference.
Mugen MBX5T
RBS5 RB2045 Futaba 3PM Hitec 5955, 5965
i did but it was to late!! plus ralphie was already drunk! i died at the end as he was half way through the straight!
btw rocco it bent the hinge pin, shock shaft, and took out the brace but it was all stock.
IT'S ALL ABOUT THE PAIN; THE INK AND THE JEWELRY ARE JUST SOUVENIERS
11-20-2005, 09:42 PM
11-20-2005, 09:52 PM
nice pics but why so much fuel line?
IT'S ALL ABOUT THE PAIN; THE INK AND THE JEWELRY ARE JUST SOUVENIERS
11-20-2005, 10:08 PM
The stock Hinge pin Brace on the LSP sucks royal!!! I Forgot that i broke that too(Sorry so 2 parts have broke in a year) The 1st time i drove my lsp at leisure hour. Thats a pretty hefty arm pullin on a chitty brace
Dont mess wit my sig Line tune!
--Then follow the rules! haha!-- -Tune
11-20-2005, 10:47 PM
Rocco, that's the same brace that Lance-a-little broke on his LSP in a crash that didn't look too bad to me. Maybe Kingheadz will be making a better one but this is one of the reasons why I don't much care for the LSP. It's too heavy and breaks too easily. Not as bad as a Revo, but not as tough as the Jammin' appears to be from all reports.
11-20-2005, 10:55 PM
What do you expect from an RTR???? There are parts that arent going to be up to snuff for racing... It goes for every single RTR on the market.
The brace isnt good enough for the ridgeness of the alum. arms. A 20 buck king headz part fixes it for good
Dont mess wit my sig Line tune!
--Then follow the rules! haha!-- -Tune
11-20-2005, 11:05 PM
I dunno, maybe someone could help me with the fuel line routeing???
11-20-2005, 11:11 PM
satoch Wrote:It's too heavy and breaks too easily. Not as bad as a Revo, but not as tough as the Jammin' appears to be from all reports. what's the comparison in weight? how much does the lsp weigh and how much does the jammin' weigh?
Kanai K3
Kanai K2 LSP-R project
11-20-2005, 11:28 PM
From what ive red the lsp weighs in at the 10lb mark... I looked to see what a jammin weighed but its not on the site
Dont mess wit my sig Line tune!
--Then follow the rules! haha!-- -Tune
11-21-2005, 12:11 AM
people at the UE board were weighing ready to go jammin's at 9 1/2lbs give or take some change.
Mugen MBX5T
RBS5 RB2045 Futaba 3PM Hitec 5955, 5965 |
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
Jammin CRT.5 Minni Truggy? | Agd123 | 5 | 3,048 |
08-06-2008, 09:05 AM Last Post: Tex |
|
Revo, a race truggy? | snoracer | 61 | 14,874 |
02-13-2008, 05:27 PM Last Post: J-Dub |
|
Indoor Tires. Truggy, Boas And Holeshots? or just Boa | J-Dub | 9 | 3,103 |
01-15-2008, 01:02 PM Last Post: J-Dub |
|
$300 rtr truggy for the beginners. | DAVEC-NITRO-RS4 | 5 | 2,508 |
10-21-2007, 09:45 PM Last Post: rocco79 |
|
Possible AE truggy? | Evil3 | 94 | 15,031 |
08-14-2007, 11:31 PM Last Post: J-Dub |
|
Which tires for Truggy outdoor? | motoxer4life | 23 | 6,038 |
08-06-2007, 03:29 PM Last Post: motoxer4life |
|
What truggy as a basher? | motoxer4life | 198 | 35,978 |
07-19-2007, 08:21 AM Last Post: motoxer4life |
|
Cen Matrix TR Arena?? | Revoguy22 | 6 | 1,886 |
06-13-2007, 03:09 PM Last Post: Casketman |
|
The 8 Truggy's R Out, | SLOW REVO | 125 | 21,033 |
03-14-2007, 06:33 PM Last Post: FreeRideFrosty |
|
decent entry level truggy | AddictedtoNITRO | 55 | 10,151 |
02-25-2007, 04:45 PM Last Post: AddictedtoNITRO |