Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Kanai II Truggy Buildup
#76
My truggy was just as fast as my savage if not faster... I dont think a 2 speed adds that much on the top end... I think it just helps nitro engines build the torque they need down low with a lower ratio...

Im sure if you got those boas on youd be fine
Dont mess wit my sig Line tune!
--Then follow the rules! haha!-- -Tune
Reply
#77
Assuming you have a 46 tooth spur (stock kyosho) and a 16 tooth bell you are running a 2.8 ratio. Thats about 1.5 too low for runnign mt tires... I hope you have another $70 for a new clutch soon. Because you are going to smoke the clutch and over work your engine.....

But then again what do I know....LOL
A friend will help you move, but a REAL friend will help you move a body.
Reply
#78
Quote:But then again what do I know....LOL

Well let's see.

1. You know where to shop for big hats.
2. You know how to get mad over someone leaving your sharpie out.
3. You know how to make R/C purchases without the wife knowing.
4. You know how to ride your tri-cycle when your drunk.
5. You know how to lay the power down !!!
6. You know how to embalm some fresh meat.
Reply
#79
Lmao
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
#80
Laughing my ass off....

Good to have you back....

Using that as my sig line...
A friend will help you move, but a REAL friend will help you move a body.
Reply
#81
cemeb4dk Wrote:Assuming you have a 46 tooth spur (stock kyosho) and a 16 tooth bell you are running a 2.8 ratio. Thats about 1.5 too low for runnign mt tires... I hope you have another $70 for a new clutch soon. Because you are going to smoke the clutch and over work your engine.....

But then again what do I know....LOL


Nuh unh!!! I got me some LSP ring and pinion gears so I can run this chit dude...:p:
Tekno EB48.4 HobbyWing XR8 Sanwa M12
Reply
#82
LOL
That is the rario at your clutch.

Ask how many LSP drivers are running a 16t bell, and I bet zero. And we have your ring and pinions and a larger spur gear... I have a NR 528 and the most I ever ran was a 15.

But like I said before what do I know, just trying to save you some aggrevation but you obviously know more.... 8^)

So good luck!!!!!!!
A friend will help you move, but a REAL friend will help you move a body.
Reply
#83
cemeb4dk Wrote:LOL
That is the rario at your clutch.

Ask how many LSP drivers are running a 16t bell, and I bet zero. And we have your ring and pinions and a larger spur gear... I have a NR 528 and the most I ever ran was a 15.

But like I said before what do I know, just trying to save you some aggrevation but you obviously know more.... 8^)

So good luck!!!!!!!

Alright then... You are talking about running a 15t with regular sized tires though, right? Right now all I have to run is the komodo LP's and they're tiny.
Tekno EB48.4 HobbyWing XR8 Sanwa M12
Reply
#84
when u go to the track get some vid of that thing.
The worst dirtbiker is always one step ahead of even the best quad rider....

Tex Wrote:WTF, racing ranger 2?????? and racing ranger 1???? #2 needs his ass kicked for taking someone elses name.
Reply
#85
If I remember to. We're rolling up there around 6 and I want to run as much as possible before sundown.
Tekno EB48.4 HobbyWing XR8 Sanwa M12
Reply
#86
yeah if you do video tape it make sure you POST IT UP...Big Grin lol
Losi 8ight with v-spec[SIZE="4"]
[/SIZE]
Reply
#87
Hey, my foams came in! My boas are all glued up and ready to run tonight.

If I do take video, I'll post it up.
Tekno EB48.4 HobbyWing XR8 Sanwa M12
Reply
#88
Uh-oh. I had a run away. Got about 40ft and then re-gained power. Thankfully, it jumped a little curb and ended up in a person down the street's lawn, about a foot away from their SUV tire. That could have been bad. I don't know what could have went wrong though, everything that should be loc-tighted is, all plugs are secure in the receiver, and there's no binding w/ the servos in motion. Ideas? It ran fine afterwards, no glitches or anything.

Do you think that mabye the metal gears (clutch and spur) are causing interference?
Tekno EB48.4 HobbyWing XR8 Sanwa M12
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  RC Truggy Jamara Alfonser 1 13,608 01-23-2019, 12:49 PM
Last Post: Koziol
  Insane little CRT .5 truggy with modded 18tz Thirdgen89GTA 4 2,945 04-25-2007, 11:56 AM
Last Post: slaytanic
  GTA's new Truggy. :) Thirdgen89GTA 10 4,394 10-02-2006, 08:36 PM
Last Post: Thirdgen89GTA
  CEN truggy video RobH 5 3,255 06-14-2006, 10:44 PM
Last Post: Racin' Ranger1
  Inferno GT Buildup (pics) SixVi6-Camaro 22 7,152 04-29-2006, 11:02 PM
Last Post: SixVi6-Camaro
  bashed my truggy today RobH 14 5,246 02-17-2006, 02:44 PM
Last Post: squirrel

Forum Jump:


Users browsing this thread: 12 Guest(s)