Posts: 2,332
Threads: 88
Joined: Jul 2004
Reputation:
0
Revo2k Wrote:Naw man...It can't be that bad on the low end. I know it needs richening cause right now it sucks.
Ask Six, when we were at the track in StLouis, his buggy would catch me easily in the first half of the straight, then the RPM's would reach the powerband and I would pull away from him.
The Crappy low end is the main reason MOST people don't like the Kanai. I liked it. Kinda sounds like a 2-speed buggy.
I'll keep my God, my freedom, my guns, and my money. You can keep "THE CHANGE."
Posts: 10,555
Threads: 465
Joined: May 2005
Reputation:
0
rocco79 Wrote:but its a buggy engine ... it should work in a buggy?
whats gearing u running matt?
15 t clutch bell...Not sure on the spur though.
Tekno EB48.4 HobbyWing XR8 Sanwa M12
Posts: 422
Threads: 46
Joined: Oct 2005
Reputation:
0
there is plenty of low on the keni motor if its tuned right.the hesitent takeoff is due to a miss adjusted mid setting.
Posts: 13,181
Threads: 169
Joined: Jul 2004
Reputation:
0
well if thats how it runs its not an off road motor... Matt couldnt even get over the small table at the begging of the straight
Dont mess wit my sig Line tune!
--Then follow the rules! haha!-- -Tune
Posts: 10,555
Threads: 465
Joined: May 2005
Reputation:
0
GWPHOENIX Wrote:there is plenty of low on the keni motor if its tuned right.the hesitent takeoff is due to a miss adjusted mid setting.
So if I do find this mysterious mid range needle, what should I do? Richen it I assume? God, if this solves all my problems....lol
Tekno EB48.4 HobbyWing XR8 Sanwa M12
Posts: 422
Threads: 46
Joined: Oct 2005
Reputation:
0
look on both sides of the carb you will see
Posts: 13,181
Threads: 169
Joined: Jul 2004
Reputation:
0
A F'IN 15 TOOTH IN A BUGGY!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!?????????????
oK i think i found your problem matt!!
It should be a 13tooth man!!! I think your dad was wrong your a dumbass! LOL!
Dont mess wit my sig Line tune!
--Then follow the rules! haha!-- -Tune
Posts: 10,555
Threads: 465
Joined: May 2005
Reputation:
0
rocco79 Wrote:well if thats how it runs its not an off road motor... Matt couldnt even get over the small table at the begging of the straight
In practice I could....Racing I couldn't though of course. That was when the low was slobbery rich and it had some punch though...
Tekno EB48.4 HobbyWing XR8 Sanwa M12
Posts: 2,332
Threads: 88
Joined: Jul 2004
Reputation:
0
Matt, I would say leave the LSN where it is. Richen the HSN about 1/4 turn, and see the difference. You will still have the top end, but it should help keep enough fuel flowing to keep it from lean bogging when you get right back on throttle.
I'll keep my God, my freedom, my guns, and my money. You can keep "THE CHANGE."
Posts: 2,332
Threads: 88
Joined: Jul 2004
Reputation:
0
Matt, I would say leave the LSN where it is. Richen the HSN about 1/4 turn, and see the difference. You will still have the top end, but it should help keep enough fuel flowing to keep it from lean bogging when you get right back on throttle.
Oh, and DON'T adjust the mid range....
I'll keep my God, my freedom, my guns, and my money. You can keep "THE CHANGE."
Posts: 13,181
Threads: 169
Joined: Jul 2004
Reputation:
0
Revo2k Wrote:15 t clutch bell...Not sure on the spur though.
WTF!?!?!?!?
13 man!
Has anyone else noticed this?!?!?! This is the problem?
Dont mess wit my sig Line tune!
--Then follow the rules! haha!-- -Tune
Posts: 10,555
Threads: 465
Joined: May 2005
Reputation:
0
thenewguy821 Wrote:Matt, I would say leave the LSN where it is. Richen the HSN about 1/4 turn, and see the difference. You will still have the top end, but it should help keep enough fuel flowing to keep it from lean bogging when you get right back on throttle.
Alright. I'll try in the morning, if I fire it up right now I'll get beaten lol..
Tekno EB48.4 HobbyWing XR8 Sanwa M12
Posts: 10,555
Threads: 465
Joined: May 2005
Reputation:
0
I'm outta money until somebody buys this servo so no new cb just yet...
But if I drop 2 teeth will i have no top end?
Tekno EB48.4 HobbyWing XR8 Sanwa M12
Posts: 422
Threads: 46
Joined: Oct 2005
Reputation:
0
before you do that get the 15 tooth off and put on a 13 if not 14
Posts: 3,897
Threads: 254
Joined: Jan 2020
Reputation:
0
I'm with rocco. Get rid of that 15T bell already!!! Stick in a 13T
Posts: 3,498
Threads: 67
Joined: Jul 2004
Reputation:
0
15 tooth is way too big for that. 13t 14t tops......
Dont mess with the mid needle, you have to adjust LSN also when messing with the mid. If you havent found the mid needle yet, chances are you dont have a mid needle. leave it alone anyway.
Posts: 10,555
Threads: 465
Joined: May 2005
Reputation:
0
GWPHOENIX Wrote:before you do that get the 15 tooth off and put on a 13 if not 14
Before I do what? Richen it? Sorry, alot of posts right now lol....
I can't get one just yet though (a 13t cb), no cash.
Tekno EB48.4 HobbyWing XR8 Sanwa M12
Posts: 422
Threads: 46
Joined: Oct 2005
Reputation:
0
you will never tune it right with a 15 on
btw the spur is 46 tooth
Posts: 10,555
Threads: 465
Joined: May 2005
Reputation:
0
GWPHOENIX Wrote:before you do that get the 15 tooth off and put on a 13 if not 14
Arrgh stupid comp lag, I gotta restart real quick.
Tekno EB48.4 HobbyWing XR8 Sanwa M12
Posts: 2,332
Threads: 88
Joined: Jul 2004
Reputation:
0
Yeah, I agree with Rocco. Switch to a 13t Clutchbell, and leave the low speed needle where it is. Work a little with the High speed needle.
I read somewhere that the "mid-range" needle on the Kanai is a factory Flow setting, and shouldn't be messed with.
Other than that, if you decide (from one of your previous posts) to sell the Kanai, I want first dibs. That'll scream in the Inferno GT with the 2-speed.
I'll keep my God, my freedom, my guns, and my money. You can keep "THE CHANGE."
Posts: 13,181
Threads: 169
Joined: Jul 2004
Reputation:
0
dont touch another needle untill you put a 13 t on that buggy!
Your clutch is screaming inside there man!
Dont mess wit my sig Line tune!
--Then follow the rules! haha!-- -Tune
Posts: 3,498
Threads: 67
Joined: Jul 2004
Reputation:
0
In that last video you linked, are punching the throttle right away or smooth on the gas ????
Posts: 10,555
Threads: 465
Joined: May 2005
Reputation:
0
snakebite46 Wrote:In that last video you linked, are punching the throttle right away or smooth on the gas ????
Full (punch) right away.
Tekno EB48.4 HobbyWing XR8 Sanwa M12
Posts: 10,555
Threads: 465
Joined: May 2005
Reputation:
0
Damn....Earliest I can get a CB is friday  When I get paid...
Tekno EB48.4 HobbyWing XR8 Sanwa M12
Posts: 3,498
Threads: 67
Joined: Jul 2004
Reputation:
0
that might be a HSN problem IMO. How's the car feel running it around 1/4 throttle ? Check them clutch shoes too. You might have some glazing going on there. I had a problem last year at a DD race. My P5 sounded almost like yours does. It turned it to be the clutch springs were worn out.
|
