11-05-2006, 10:49 PM
I'd pick up the 17 mm setup from Maximizer, probably the cheapest/lightest 17mm setup for a revo.
Tekno EB48.4 HobbyWing XR8 Sanwa M12
2006 Fall Classic Nitro Championships
|
11-05-2006, 10:49 PM
I'd pick up the 17 mm setup from Maximizer, probably the cheapest/lightest 17mm setup for a revo.
Tekno EB48.4 HobbyWing XR8 Sanwa M12
11-05-2006, 10:54 PM
The ofna adapters are for the tmaxx if I remember right,but you can use them on the revo. With the ofna,you just put the pin in and then screw in the set screw(use thread lock,was told to put some shoe goo on them also to help them stay in),slap on the tires and tighten down the nut and thats it.
Tower is where I got mine and they only come in blue. Oh,and there is a small offset to them. I would have to say it is only a few mm's so it is not that big of a deal. But rims will not cover up that set screw which is why you should put some thread lock and shoe goo on it. As for the maximizers,use the alum. adapters and not the plastic ones.
Myspace.com/Mtdrew24
11-06-2006, 10:04 AM
The Ofnas have a huge offset difference IMO. I would go with Maxximizers or something specific to Revos.
Mugen MBX5T
RBS5 RB2045 Futaba 3PM Hitec 5955, 5965
11-06-2006, 04:15 PM
I have yet to see many 17mm adapters for the revo besides the maximizers and Ofna's. I have seen a couple of other sites that have their own idea that look like the maxmizers adapters.
https://www.m2cracing.com/categoryNaviga...tegoryId=2 This is one of the newest I have found as of late. No use of a pin with these. But you need to buy their axles in order for it to work. So I am tossing this one around in my head for now.
Myspace.com/Mtdrew24
11-06-2006, 08:36 PM
I use stock axles, plastic hexes, and all since I've owned my revo. Never had any problems at all, never stripped or broke anything.
why upgrade at all? cool factor? more stuff to go wrong IMO.
Mugen MBX5T
RBS5 RB2045 Futaba 3PM Hitec 5955, 5965
11-06-2006, 08:42 PM
CRT wheels all the way. I ran those 17mm crt rims and it was dialed for my taste.
11-06-2006, 09:12 PM
I'm with tex, I ran all stock driveshafts and hexs too.
11-16-2006, 04:54 PM
So who's doing this race again? Think I may have to take Tex's place in MT and try out my Revo. Still gonna have to run buggy since the Jammin is so hooked....
RC HOBBIES
1550 n. rt.59 suite 170 Naperville,Il.60563
11-16-2006, 04:58 PM
Wrong thread dang it. I'm thinking of the il nitro championship at LH dec 2-3. What the heeeeeeelllllllllllllllllllll. Friggin old threads hangin around.
RC HOBBIES
1550 n. rt.59 suite 170 Naperville,Il.60563
11-16-2006, 05:50 PM
you'll have fun with the revo bro....I already miss mine.
Mugen MBX5T
RBS5 RB2045 Futaba 3PM Hitec 5955, 5965
11-16-2006, 05:51 PM
Why did you sell it then? Run both? Or just semi-retire the Revo like I plan to do. Only run it at big races or if a decent number of people show up to make a MT class.
Myspace.com/Mtdrew24
11-16-2006, 05:58 PM
cause I need money to buy a second class and I have zero money without selling stuff. I'm a one RC at a time guy, I've been there and done that racing two classes and for me it's too much maintenance/money.
I wouldn't have a GT if I didn't sell my revo. I've soley raced the revo for 2 years, I need a change. I'm glad I sold the revo, but I do miss it (if that makes sense) In case you haven't gotten the hint yet I'M POOR ....hahahaha
Mugen MBX5T
RBS5 RB2045 Futaba 3PM Hitec 5955, 5965
11-16-2006, 06:00 PM
I'm in the same boat as you Tex, one at a time or it's too expensive. I miss the revo too! haha they're fun, a year or so from now ask someone to drive one, it brings back memories lol.
Tekno EB48.4 HobbyWing XR8 Sanwa M12
11-16-2006, 06:00 PM
Hard to let go of the revo but it had to be done basicly?
I can understand all of that(letting go and money).
Myspace.com/Mtdrew24
11-16-2006, 06:04 PM
Tex Wrote:cause I need money to buy a second class and I have zero money without selling stuff. I'm a one RC at a time guy, I've been there and done that racing two classes and for me it's too much maintenance/money. I wouldnt say poor...Just have other responsibilities and comitments that take alot of $$$ MBX5T - O.S. MBX5R - Novarossi Nomadio
11-16-2006, 06:05 PM
it didn't hit me until after the revo was gone that I sold it. I was and still am a bit depressed to be honest ...hahaha
Mugen MBX5T
RBS5 RB2045 Futaba 3PM Hitec 5955, 5965
11-16-2006, 06:06 PM
MX_KEVIN Wrote:I wouldnt say poor...Just have other responsibilities and comitments that take alot of $$$ ok, 2 decent cars and a pretty nice house, plus a kid that like to do her "activities".... My monthly bills are around $3500+ including mortgage if that gives you any idea. So yeah, your right Kevin
Mugen MBX5T
RBS5 RB2045 Futaba 3PM Hitec 5955, 5965
Myspace.com/Mtdrew24
11-16-2006, 06:09 PM
I remember when I was 18 and I said "man, if I could only make $2000 a month, I'd be set"
Now I make $3500 a month and I'm poor!!!!!!!!
Mugen MBX5T
RBS5 RB2045 Futaba 3PM Hitec 5955, 5965
11-16-2006, 06:11 PM
LOL man tex ive said that to myself alot, then i say man if i didnt piss away all my money racing i could buy gas hahaha
Here is a link to my website-
http://www.czech-it-out-graphics.com 1/29/07 never forget....TTT alute: Bringing old know-it-all blow hards back to reallity at a forum near you "Always Imitated, Never Duplicated"
11-16-2006, 06:15 PM
yeah I remember the teenage days of putting $2 in gas in the car at once and chit like that!!
Only then I could go like 40 miles on $2.....It was like $.80 a gallon hahaha
Mugen MBX5T
RBS5 RB2045 Futaba 3PM Hitec 5955, 5965
11-16-2006, 06:16 PM
ahh the good ole days now 5 bucks aint chit
Here is a link to my website-
http://www.czech-it-out-graphics.com 1/29/07 never forget....TTT alute: Bringing old know-it-all blow hards back to reallity at a forum near you "Always Imitated, Never Duplicated"
11-16-2006, 06:17 PM
Those were the days..... 20 bucks would last all weekend. 2 in gas, 1.50 for smokes. 5 for nickel bag from the local pusher, 1.50 for movie and the rest you'd spend on candy to help the cotton mouth.
11-16-2006, 06:18 PM
lol or pu22y cant forget to spend some moeny on that right richy
Here is a link to my website-
http://www.czech-it-out-graphics.com 1/29/07 never forget....TTT alute: Bringing old know-it-all blow hards back to reallity at a forum near you "Always Imitated, Never Duplicated"
11-16-2006, 06:25 PM
Shit, I was skinny and had hair back then Mikey, no need to pay for the stuff. =) Wouldnt catch me in a hotel room with my nuts hanging out passed out with a bag of Cheetos and porn on tube. =P
How about it Rocco. |
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
Different tires for the Slash Classic? | PedeBasher8507 | 5 | 5,740 |
04-06-2009, 07:33 PM Last Post: PedeBasher8507 |
|
Nitro conversion, Nitro or electric? | PedeBasher8507 | 22 | 14,064 |
10-06-2008, 06:57 PM Last Post: Evil3 |
|
Indoor offroad nitro on sundays | cheesecake | 4 | 4,461 |
06-14-2008, 01:08 AM Last Post: J-Dub |
|
Fall Pizza Party? | mikeh | 111 | 25,317 |
09-07-2007, 12:24 PM Last Post: Mr. Tune |
|
OMG sucky Hours for Out Door Nitro | Abusive | 73 | 17,105 |
05-31-2007, 06:23 PM Last Post: Mr. Tune |
|
Nitro Turnout On Saturdays | UE-Maxx | 13 | 3,791 |
06-13-2006, 06:26 PM Last Post: UE-Maxx |
|
Nitro Sat. Nite 4-8-06 | Rob Kass | 37 | 8,619 |
04-10-2006, 04:59 PM Last Post: kevinF |
|
SUmmer Sunday Nitro racing | DAVEC-NITRO-RS4 | 6 | 3,014 |
02-18-2006, 09:22 AM Last Post: DAVEC-NITRO-RS4 |
|
LHR January 15th, 2006 | RCDad | 120 | 25,389 |
01-19-2006, 04:21 PM Last Post: FreeRideFrosty |
|
LHR January 8th, 2006 | RCDad | 118 | 25,185 |
01-11-2006, 09:38 AM Last Post: Tex |