Posts: 21
Threads: 6
Joined: Mar 2005
Reputation:
0
I just got a New Wasp 2.8 for my MGT and the moter will not run in it for sume reson it will Idel good till i get hot and then when i get going and hit Bracks and the Idel drops down it Dies. I have try Hot Mediom and Cold plugs and nuthing works i have set it back to the Stock seting on the moter i only got 3 tanks a gass throw it.. Could it have sume thing to do with how small the MGT Stock Pipe is the MGT come with a Thundertiger .21 Pro. and now im trying to run a .28throw that pipe i wonder if it is makeing tomuch Back Prsher on the moter. the pipe is same size as a 1/10 Scale cars pipe. Please let me know ??????
Posts: 3,634
Threads: 181
Joined: Oct 2004
Reputation:
0
Is your idle set right. Look in the carb, when full brakes applied there should be about a 1mm gap
A friend will help you move, but a REAL friend will help you move a body.
Posts: 272
Threads: 85
Joined: Jul 2004
Reputation:
0
is that a wasp .28 or .26? the .28 uses a turbo glow plug that is what your using?standard plugs are used on the .26
i had more then enough wasps to know that they are tempermental,check your idle set screw when you brakes applied while idling,and you glow plug should be a med, i found this to be the best epescially the ofna med turbo plug works great with fuels from 25% to 40% i use 25 and 30% fuels and they are set 2 turns in on low and med screws,but these engines are tricky when it comes to tuning,,
try tuning while on a box hitting the throttle every now and then the after you get get where it kicks good set it down on the ground hold front tires down and crank the throttle to see if your bogging ,your trying to get the engine to recognize the back pressures from the drivetrain,run it moderatly in a small area in quick bursts again the engine needs to feel the weight of the truck on it,
this works for me i do this for about 3 tanks constantly checking temps as you adjust the needles these engines are at home in the 280-300 degree range mine are hitting 289-295 range and are wheeling on a dime i still get lots of smoke and a good oil drip
all else fails maybe i can meet you to help this out in person
Lycon Racing Products
True MSD & Taylor Ignition Wires For 2 Stroke Gas Engines Zenoah & CY
Stainless Steel Screw Kits & Bulk Packs
For Info
Lyconracing@comcast.net
Posts: 9,001
Threads: 126
Joined: Jul 2004
Reputation:
0
mid needles shouldn't be messed with from the factory. Those are preset from the factory for the easiest tune on the LSN and HSN.
If it runs like crap after it heats up that tells me it's getting too hot. Either your LSN or HSN are too lean.
I can't tune your truck from here but I can help you at the race on Sat.
Mugen MBX5T
RBS5
RB2045
Futaba 3PM
Hitec 5955, 5965
Posts: 272
Threads: 85
Joined: Jul 2004
Reputation:
0
these are the only motors i have bought in the past yr half and it took me some time to feel it out but ,i use no others now,in the end your going to have to adjust both low and med screws med plug and 25 % trinity or what ever is decent,
if all else fails how much i'll buy that bad boy if the price is right and if you can not tame it,LOL
Lycon Racing Products
True MSD & Taylor Ignition Wires For 2 Stroke Gas Engines Zenoah & CY
Stainless Steel Screw Kits & Bulk Packs
For Info
Lyconracing@comcast.net
Posts: 21
Threads: 6
Joined: Mar 2005
Reputation:
0
i payed 169.99 for it and i got it tusday Night. im ruing 20% Nitro and 14 Oil that what i run in my Picco .26 and it run GOOD sould i change that out if you want to buy it off me u can make me offer on it if i cant get it to work i just take it back and get a nuther one ? my get a nuther .26 Pecco Not sure i like to get it working in my MGT we will have to see .... any of you guyse live by or in DeKelb?
Posts: 272
Threads: 85
Joined: Jul 2004
Reputation:
0
hmm,try to get tuned before doing anything if you can not then
if you can exchange it out for another go ahead that is better for you,but if they dont take it back
i can offer $145.00,but wait till tex or someone at the track can try get it tuned before doing anything
Lycon Racing Products
True MSD & Taylor Ignition Wires For 2 Stroke Gas Engines Zenoah & CY
Stainless Steel Screw Kits & Bulk Packs
For Info
Lyconracing@comcast.net
Posts: 401
Threads: 30
Joined: Oct 2004
Reputation:
0
Mid needles can be adjusted but.. u have to move the lowspeed accordingly. So if u move the mid speed needle in 1 turn u will need to move the low out 1 turn. But really not worth messing with.. it changes where the hit comes in on the powerband.